System type: 4 units, 2 frequency division and phase inversion
Rated power: 300 W
Maximum power: 600W
Peak power: 1200 W
Nominal impedance: 4 ohms / (16 ohms) switchable impedance
Nominal sensitivity (1W @ 1m): 106 DB @ 4 ohms 100 dB @ 16 ohms
Maximum sound pressure level (Pmax @ 1m, 4 ohms): 131dB @ 300W (134dB @ 600W)
Maximum sound pressure level (Pmax @ 1m, 16 ohms): 125dB @ 300W (128dB @ 600W)
Frequency bandwidth: 80hz-18.5khz
Nominal directivity (- 6dB): single array module is 120 ° horizontal 8 ° vertical
(Note: the vertical coverage angle of the line array varies according to the length and curvature of the array)
Adjustable angle: 0 ° ~ 12 °, unit adjustment angle: 2 °
Recommended number of arrays: ≥ 4
Number of rated parallel connection: ≤ 4
Transducer configuration: low frequency driver 8 ″ (200 mm unit 50 mm voice coil) × 2
High frequency driver 1.3 "(34mm voice coil) × 2
High frequency Waveguide Horn 1 ″ (25 mm throat) × 2
Frequency division mode: passive
Connector: peakon NL4 × 2 Pin1 + / 2 + pos. Pin1 - / 2-neg
Box material: 15mm (0.6 ″) birch plywood
Box size: w748 mm * D 305mm * h248mm (187mm)
Weight (each): 24 kg